Parameter Transition - Omron RX User Manual

3-6 Parameter Transition

Operation and sequence of code display
Press the Increment/Decrement key to scroll through codes in the code display and to increase/decrease the number in the data
display. Press either key until you see the desired code or data. For fast-forwarding, press and hold either key.
dk0k0k1
dk0k0k2
dk1k0k4
fk0k0k1
fk0k0k4
ak0k0k1
ak0k8k5
bk0k0k1
bk1k3k1
ck0k2k1
ck0k2k2
Operation and sequence of monitor/data display
Monitor Mode
Press the Mode key in the code display to display its monitor value.
0.0k0
(Monitor display)
or
Press the Mode/Enter key in the monitor display to return to its code display.
0.0k0
Note: By factory default,
Press the Mode key in this status to display
Function/Extended Function Mode
Press the Mode key in the code display to display its data.
(Data display)
*1 *2
To upper limit
3k0.0k1
3k0.0k0
or
2k9.9k9
To lower limit
*1. The setting displayed varies depending on the parameter.
*2. To change the data, be sure to press the Enter key.

3-6 Parameter Transition

*1
appears at power-on.
dk0k0k1
.
Data setting
Press the Increment/Decrement key to increase/decrease the
number.
(Set the desired number.)
Press the Enter key in the data display to fix the data and to
return to the code display.
Press the Mode key in the data display to return to its code
display without changing the data.
3
3-12