Removing The Digital Operator; Removing The Front Cover; Removing And Mounting The Front Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2-2 Terminals - Omron SYSDRIVE 3G3HV SERIES User Manual

Installation
2-2-1 Removing and Mounting the Front Cover
Remove the front cover to wire the terminals. Remove the Digital Operator from the front
cover before removing the front cover. Do not remove or mount the front cover without
first removing the Digital Operator, otherwise Digital Operator may malfunction due to
imperfect contact.
H Removing the Digital Operator
• Press the lever on the side of the Digital Operator in the arrow 1 direction to unlock the Digital Opera-
tor and lift the Digital Operator in the arrow 2 direction to remove the Digital Operator as shown in the
following illustration.
H Removing the Front Cover
• Press the left and right sides of the front cover in the arrow 1 directions and lift the bottom of the cover
in the arrow 2 direction to remove the front cover as shown in the following illustration.
Chapter 2
2-11