GE Telligence Patient-Staff Communications System Operation Manual page 39

Table of Contents

Enlarged version

Telligence Patient-Staff Communication System Operation Manual

Select the filter to be displayed, then click OK. This closes the

dialog box and populates the room list.

Select the room or bed that you want to configure, then click

Call Priorities. The system retrieves the call devices connected to

the staff or patient station being configured.

Select the device to be configured, then click Change Priority.

Select the call priority to be assigned to the device, then click

OK.

To revert to the default priorities for a specific staff or patient

station:

Select the Room List tab, then select the room to be changed.

Press the Call Priorities button. The staff console retrieves the

current call priorities for the room.

Select the call to be changed, then press Set to Default.

Using staff consoles and annunciators

Chapter 3

Table of Contents

Show Quick Links

Chapters

Table of Contents