Important Information - GE Telligence Patient-Staff Communications System Operation Manual

Important information

Telligence Patient-Staff Communication System Operation Manual
Regulatory issues
Telligence units comply with UL and CAN/ULC and are listed to both
US and Canadian requirements. The products will also comply with
the emissions rules of the Federal Communications Commission
(FCC) and Industry Canada. Check with local and state codes for the
required regulations in your area.
The Telligence System has been designed and pre-tested under
standardized testing conditions to not react to ESD phenomena.
The supplemental equipment that can be added to this system may
be separately listed per any of the following standards or categories:
• UL 114 Office Appliances and Business Equipment
• UL 478 Electronic Data Processing Equipment
• UL 1950 Information Technology Equipment including Electrical
Business Equipment
• UL 60950 Information Technology Equipment
• UL 544 Medical and Dental Equipment
• UL 60601-1 Medical Electrical Equipment
• UL 217 Single and Multiple Station Smoke Alarms
• UL 268 Smoke Detectors for Fire Protective Signaling Systems
• UL 1778 Uninterruptible Power Supply Equipment
The Telligence Patient-Staff Communication System can be
connected to supervised smoke detectors and fire alarm systems
only. Any fire alarm signal annunciated by the Telligence System is
considered supplemental only. The Telligence System is not, and
shall not be considered, a primary fire alarm system.
Industry Canada compliance statement
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled "Digital
Apparatus," ICES-003 of Industry Canada.
iii