GE Telligence Patient-Staff Communications System Operation Manual page 111

Telligence Patient-Staff Communication System Operation Manual
patient care rooms, the staff emergency station may also be located
in staff-only rooms, as a precautionary measure for facility staff.
Figure 39: Staff emergency station (shown without pull cord)
The staff emergency station may be equipped with a pull cord, can
be a standalone station, or can be associated with a patient station
or a staff/duty station. A staff emergency station has no audio
capability, and cannot be used to communicate with staff members
at staff consoles or annunciators.
An HC-PB2-CALLR call station may be reconfigured as a staff
emergency station if a medical device must be started or stopped in
an emergency by pressing the Emerg button (or pulling the optional
pull cord).
1. Press the Emerg button (or pull the cord) on the staff emergency
station to send a staff emergency call to staff consoles and
annunciators.
• lights by the station's Emerg button and by any linked
Emerg buttons turn on to confirm staff emergency call
placement.
• Any associated patient or staff/duty station's Call lights turn
on.
• The call assurance tone sounds at any associated patient
or staff/duty station.
• Top light sections on associated corridor and zone lights
fast flash red.
• Staff emergency tones sound at staff consoles and
annunciators, and at stations where staff follow is active.
• A staff emergency nurse call row appears on the Call
screen on staff consoles, emergency annunciators, and unit
annunciators.
Chapter 5
Staff/duty stations
105