GE Telligence Patient-Staff Communications System Operation Manual page 21

ote: Call priority labels are
configurable. The labels
shown on your system may
differ from those shown here.
Figure 9: Room List screen features
Connects the staff console or
annunciatorto the selected room
Opens a dialog that lets you
set a room reminder
Temporarily silences the
staff console alert tone
Telligence Patient-Staff Communication System Operation Manual
Overview of the ColorTouch Staff Console and Annunciator
• Add caregivers to a reminder that has already been set
• Clear reminders set for normal priority calls
Note: Only normal priority calls can be cleared from the staff
console. Higher priority calls must be cleared from the station where
the call originated.
Reminders are displayed in order of priority and elapsed time since
the reminder was set.
Room List screen
The Room List screen is used mainly for placing calls to patients or
staff. You can call a room or a bed. This screen also allows you to
specify call priority settings for specific rooms and beds.
Room/Bed list
Opens a dialog box for configuring call priorities
and privacy settings for the selected room or bed
Displays additional information
about the selected room or bed
Admin screen
The Admin screen is displayed when you press the More tab. The
Admin screen lets you calibrate staff console and annunciator touch
screens on demand so screen elements can be touched with
Opens a dialog box for
selecting a view filter
Opens the Room List
Chapter 2
15