GE Telligence Patient-Staff Communications System Operation Manual page 43

Telligence Patient-Staff Communication System Operation Manual
Setting a reminder from the Call screen
To manually set a reminder from the Call screen:
1. Answer a call and press the Set Reminder button.
— or —
Select the Calls tab, touch a nurse call row, and press the Set
Reminder button.
Note: Use the latter method to place a call on reminder without
answering the call.
Figure 17: Set Reminder window
2. On the Set Reminder window that appears, touch one or more
staff level priority checkboxes (red for RN, amber for LPN, and/or
green for aide) to assign one or more staff level priorities to the
reminder, then press OK.
The call is moved from the Call screen to the Remind screen.
Note: On emergency-mode annunciators, calls placed on reminder
are displayed on the both the Call and the Remind screen.
Setting a reminder from the Audio screen
To set a reminder from the Audio screen:
1. While conducting a call on the Audio screen, press the Set
Reminder button.
2. Touch one or more staff level priority checkboxes (red for RN,
amber for LPN, and/or green for aide) to assign one or more
staff level priorities to the reminder, and press OK.
A reminder row representing the call appears on the Remind screen.
The row is located, according to its call priority and the elapsed time
since the call was received, at the appropriate place in the reminder
list.
Note: Staff members cannot place reminders on calls to or from
staff consoles or annunciators.
Using staff consoles and annunciators
Chapter 3
37