Using The Manual; Required Tools And Adhesives; Ultracote Covering Colors; Before Starting Assembly - Hangar 9 B25J Mitchell ARF Assembly Manual

Using the Manual

This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next to each step to keep track of each step completed. Steps
with a single box ( ) are performed once, while steps with two boxes (
repeating, such as for a right or left wing panel, two servos, etc. Remember to take your time and follow the directions.

Required Tools and Adhesives

Tools
5/32-inch (4mm), 7/32-inch (5.5mm), 1/4-inch (6mm)
Adhesives

UltraCote Covering Colors

Before Starting Assembly

Before beginning the assembly of the B-25 Mitchell, remove each part from its bag for inspection. Closely inspect
the fuselage, wing panels, rudders, and stabilizer for damage. If you find any damaged or missing parts, contact the
place of purchase.
If you find any wrinkles in the covering, use a heat gun or sealing iron to remove them. Use caution while working
around areas where the colors overlap to prevent separating the colors.
HAN101 – Sealing Iron
HAN141 – Sealing Iron
Sock
) indicate that the step will require
HAN100 – Heat Gun
HAN150 – Covering Glove
3