Section 11: Wing Installation
Required Parts
1
/
-inch socket head bolt (2)
2
Required Tools and Adhesives
Step 1
Slide the wing tube into one of the wing panels.
Step 2
Slide the remaining panel onto the wing tube. The panels
should fit tight against each other.
Step 3
Hold the wing bolt plate centered on the wing center
section. Use a felt-tipped pen to mark the location for one
of the holes in the plate.
Step 4
Use a 1/4-inch (6mm) drill bit to make a hole in the plate.
Position the plate back on the wing.
57