Table of Contents
Advertisement
Step 10
Glue the turret and guns following the procedure you have
followed in previous steps.
Step 11
Attach the tailskid to the lower rear of the fuselage using
RC-56 canopy glue.
Section 14: Receiver, Battery and Scale Accessories
Step 12
Use 30-minute epoxy to glue the radio antenna to the
nose wheel steering servo access hatch.
Step 13
Attach the side guns behind the wing as shown. Note that
the side gun blisters are not symmetrical when installed
on the fuselage. The left gun turret is positioned further aft
of the wing when compared to the right gun turret. (Study
the photos.)
71
Hide quick links:
Advertisement
Table of Contents
