Web: Implementing Configuration Changes - HP PROCURVE 6120 Management And Configuration Manual

Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.
Reminder to
reboot the switch
to activate
configuration
changes.
N o t e
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
Figure 6-6. Indication of a Configuration Change Requiring a Reboot

Web: Implementing Configuration Changes

You can use the web browser interface to simultaneously save and implement
a subset of switch configuration changes without having to reboot the switch.
That is, when you save a configuration change (in most cases, by clicking on
or
[Apply Changes] [Apply Settings]
config file and the startup-config file.
If you reconfigure a parameter in the CLI and then go to the browser interface
without executing a write memory command, those changes will be saved to
the startup-config file if you click on
browser interface.
Switch Memory and Configuration
, you simultaneously change both the running-
[Apply Changes] or [Apply Settings] in the web
6-13