Network Configuration Changes Activated - HP StorageWorks edge switch 2/32 Installation Manual

Installing and Configuring the Edge Switch 2/32
3. Click Activate to save the information. The following message box displays, as
shown in
Figure 2–45: Network configuration changes activated
4. Update the address resolution protocol (ARP) table for the browser PC.
a. Choose File >Exit to close the Embedded Web Server and browser
applications. The Windows desktop displays.
b. Choose Start > Programs > Command Prompt. A disk operating system
(DOS) window displays.
c. Delete the switch's old IP address from the ARP table. At the command
(C:\) prompt, type arp —d xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the old IP address for the switch.
d. Click close (X) at the upper right corner of the DOS window to close the
window and return to the Windows desktop.
5. At the PC, launch the browser application (Netscape Navigator or Internet
Explorer).
6. At the browser, enter the switch's new IP address as the Internet URL. The
Username and Password Required dialog box displays.
2-64
All manuals and user guides at all-guides.com
Figure 2–45.
edge switch 2/32 installation guide