Closing The Server Case - Gateway E-9525R User Manual

Closing the server case

To close the server case:
1
2
3
4
32
CHAPTER 4: Installing Components
Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
Place the top cover (1) on the server, then slide it forward until it clicks into place.
Important
The hard drive carriers shown in these illustrations may look different than
the actual hard drive carriers in your server.
Replace the screw (2) to hold the top cover in place.
Reconnect the power cord(s) and all other cables.