Gateway E-9525R User Manual page 52

4
5
6
7
8
9
10
46
CHAPTER 4: Installing Components
Lift the release tab (1) (similar on both fan cages), then push the fan cage in the direction
of the arrow (2) to unlock it from the chassis.
Lift the fan cage (3) and unplug the connectors from it, then remove the cage from the
chassis.
Important
Make sure that the arrows on top of the fans indicating airflow point to the
back of the chassis. The fan cable should exit the fan module toward the back of the
chassis.
Install system fans as necessary in the new system fan cage.
Connect the cables you removed to the new system fan cage, then align the cage with the
standoffs in the chassis.
Place the new system fan cage and fans onto the locking tabs (standoffs) in the chassis (3),
then push it in the direction of the arrow to lock it into place (4).
Replace the fan duct into the chassis.
Follow the instructions in "Closing the server case" on page 32.