Updating And Recovering The Bmc; Updating The Bmc Firmware - Gateway E-9525R User Manual

3
4
5
6
7
8
9

Updating and recovering the BMC

Updating the BMC firmware

To update the BMC firmware:
1
2
3
4
64
CHAPTER 5: Using the BIOS Setup Utility
Remove the jumper across pins 1-2 of header J3-A, then place the jumper across pins 2-3.
Follow the instructions in
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
Turn off the server, then disconnect the power cords and all other cables connected to the
server.
Follow the instructions in
Place the jumper back onto pins 1-2.
Follow the instructions in
Download the BMC firmware zip file from support.gateway.com.
Read the release notes for the firmware update.
Follow the instructions on the Web site or in the readme.txt file in the downloaded zip file
to update the firmware.
When the BMC update is complete, reboot your server.
"Closing the server case" on page
"Opening the server case" on page
"Closing the server case" on page
32.
31.
32.