Gateway E-9525R User Manual page 20

3
4
5
14
CHAPTER 2: Setting Up Your Server
Align the slots in the back server rails with the studs on the side of the server, then engage
the slots with the studs and slide the rail forward until it stops.
Locking screw (installed)
Align the locking screw holes in the rails with the threaded screw holes in the server, then
install one locking screw through the each back server rail.
Attach one mounting nut to each of the two front cabinet posts where you plan to install
the server.
Front cabinet post
Back server rail
(installed)
Stud
Stud
Mounting nut