Led Information - Gateway E-9525R User Manual

LED information

See the following table for a description of this server's LEDs and the information they provide:
LED Name
ID
System Fault
Hard drive tray
LEDs
NIC status LEDs
Power LED
AC power LED
www.gateway.com
Function Location
Aid in server Control panel and
identification back of system
board
Visible fault Control panel
warning
Indicate drive On each hard drive
status and activity tray
Identify NIC states Control panel and
back I/O panel
RJ-45 connectors
Identify the power Control panel
state of the system
Identify power Power supply
supply fault module
Color Description
Yellow On - Server identification
(front) enabled
Blue (back)
Red Off - System normal
Blinking - Non-critical system
fault
On - Critical system fault (system
needs to be shut down and
serviced)
Blue or red Blue (On) - Hard drive present
Blue (Blinking) - Hard drive
activity
Red (On) - Hard drive fault
Red (Blinking) - Hard drive
rebuilding
Off - No hard drive access
Blue (front) Blue (On) - Link
Blue (Blink) - Activity
Off - No link
LED 1 Green (On) - NIC linked
Green/ LED 1 Green (Blinking) - NIC 1
Orange Gbps activity
(back) LED 1 (Off) - No link
LED 2 Orange (On) Link speed
1 Gbps
LED 2 Green (On) - Link at
100 Mbps
LED 2 Green (Off) - Link at
10 Mbps
Blue Off - Power is off
Blinking - Power saving state (S1,
S3, or S4)
On - Power is on
Green or Green (On) - Power supply good
Orange and receiving power
Orange (On) - Power supply
critical event causing shutdown
Orange (Blinking) - Close to
protection threshold or over
within 15 seconds
Off - Power supply not receiving
power
75