Section 4-Seat; Removing/Installing The Seat; Removing; Installing - Invacare HMV Zoom 300 Service Manual

SECTION 4—SEAT
SECTION 4—SEAT
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.

Removing/Installing the Seat

NOTE: For this procedure, refer to FIGURE 4.1.

Removing

1. Fold down seat back.
2. Pulling up on the seat lever, lift the seat assembly off the seat post.

Installing

1. Align the seat pivot with the seat post.
2. Pulling up on the seat lever, lower the seat assembly onto the seat post.
NOTE: If necessary, slightly twist seat assembly back and forth to lock in place.
3. Release seat lever and lift up on seat assembly to ensure the seat is secure.
Seat Back
Seat
Seat Pivot
Seat Lever
(Located under the Seat)
Seat Post
FIGURE 4.1 Removing/Installing the Seat
19
Part No 1122167 Zoom 300 and Zoom 400