Adjusting Seat Depth - Invacare HMV Zoom 300 Service Manual

SECTION 4—SEAT

Adjusting Seat Depth

DO NOT adjust the seat position outside the specifications recommended by the
manufacturer. Otherwise, injury to user or damage to scooter may result.
NOTE: For this procedure, refer to FIGURE 4.5.
1. Remove the seat assembly from the scooter. Refer to Removing/Installing the Seat on
page 19.
2. Remove the adjustable width arms. Refer to Removing/Installing/Adjusting Arms on
page 25.
3. Remove the six (6) mounting screws located under the seat that secure the back
assembly to the seat base.
4. Adjust back assembly to one (1) of three (3) mounting positions.
5. Reinstall the six (6) mounting screws securing the back assembly to the seat base.
Securely tighten.
6. Reinstall the adjustable width arms. Refer to Removing/Installing/Adjusting Arms on
page 25.
7. Reinstall the seat assembly onto the scooter. Refer to Removing/Installing the Seat on
page 19.
NOTE: Mounting positions are in reverse order. For example, Depth-Low is the highest position.
Seat Base
Mounting
Holes
Zoom 300 and Zoom 400
WARNING
Mounting
Screws
Back
Assembly
FIGURE 4.5 Adjusting Seat Depth
22
Mounting Positions
Depth -
Low
Depth -
Medium
Depth -
High
Mounting
Screws
Back
Assembly
Seat Base
Mounting
Screws
Back
Assembly
Seat Base
Mounting Screws
Back
Assembly
Seat Base
Part No 1122167