SECTION 8—TILLER
Removing/Installing the Tiller Angle Adjustment
Assembly
NOTE: For this procedure, refer to FIGURE 8.12.
Removing
1. Remove the tiller. Refer to Removing/Installing the Tiller on page 40.
2. Remove the two (2) mounting bolts that secure the tiller angle adjustment assembly to
the front fork. Refer to FIGURE 8.12.
Installing
1. Install the two (2) mounting bolts to secure tiller angle adjustment assembly to the
front fork. Securely tighten (FIGURE 8.12).
2. Install the tiller. Refer to Removing/Installing the Tiller on page 40.
Tiller Angle
Adjustment Assembly
FIGURE 8.12 Removing/Installing the Tiller Angle Adjustment Assembly
Zoom 300 and Zoom 400
Mounting Bolts
Front Fork
NOTE: Zoom 300 shown.
Zoom 400 is the same.
54
Part No 1122167