Section 14-Transporting; Disassembling/Assembling The Zoom 300; Disassembling; Assembling - Invacare HMV Zoom 300 Service Manual

SECTION 14—TRANSPORTING
SECTION 14—TRANSPORTING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely; otherwise serious injury or damage may
result.

Disassembling/Assembling the Zoom 300

NOTE: For this procedure, refer to FIGURE 14.1.

Disassembling

1. If installed on scooter, remove the front basket. Refer to Removing/Installing the Front
Basket on page 64.
2. Remove the seat. Refer to Removing/Installing the Seat on page 34.
3. Remove the rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.
4. Remove the batteries. Refer to Removing/Installing the Batteries on Zoom 300 on
page 50.
5. Fold tiller down to lowest locked position. Refer to Adjusting the Tiller Angle on
page 43.

Assembling

1. Unfold tiller. Refer to Adjusting the Tiller Angle on page 43.
2. Install the batteries. Refer to Removing/Installing the Batteries on Zoom 300 on
page 50.
3. Install the rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.
4. Install the seat. Refer to Removing/Installing the Seat on page 34.
5. If desired, install the front basket. Refer to Removing/Installing the Front Basket on
page 64.
Zoom 300 and Zoom 400
WARNING
104
Part No 1122167