Moving The Seat Position Forwards Or Backwards; Adjusting The Armrest Width - Invacare Orion Series User Manual

Initial setup should always be done by a healthcare
professional. Adjustment by the user is only
recommended after they have been given
appropriate guidance by the healthcare professional.
Note that there may be sections in this user manual,
which are not relevant to your product, since this
manual applies to all existing modules (on the date
of printing).
4.2 Moving the seat position forwards or
backwards
The disengaging lever for adjusting the seat is located front
right below the seat.
1603456-D
1. Pull the lever A to disengage the seat.
2. Slide the seat forwards or backwards into the required
position.
3. Release the lever to lock the seat into the required
position.

4.3 Adjusting the armrest width

WARNING!
Serious injury
If one of the armrests is adjusted to a width
which exceeds the permissible value the armrest
falls out of its brackets which could lead to
serious injury.
– The width adjustment is fitted with small
stickers with markings and the word "STOP".
The armrest must never be pulled out further
then the point at which the word "STOP" is
completely legible.
– Always tighten the fixing screws properly once
adjustments have been completed.
The knobs for releasing the armrests are located under the
seat.
Setup
25