Seating; Seat Board Maintenance; Seat Rotating Disk Adjustment - Invacare Cetus Service Manual

Cetus
6

SEATING

6-1

Seat board maintenance:

Hex wrench 13 x 2pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Please remove the seat first.
3. Remove the seat board locking nuts (M8 x
4pcs).
4. Remove the seat rail screws (M8 x15L x
4pcs).
5. The entire seat can be removed.
Caution:
If the seat rail is abnormal or stuck, etc., please
replace with a new one directly.
If the seat's tipping regulator malfunctions or the
leather is damaged, please replace the entire
seat directly, and follow the above steps to
reassemble the seat rail/seat board.
S81201-92800~A
6-2

Seat rotating disk adjustment:

Hex wrench 17 x 2pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Remove the seat and rear shroud lower
cover.
3. Remove the fixing screw set of the seat
rotating disk (M10 x55L x 1pc).
4. The entire set of seat rotating disk can be
removed.
Please refer back in reverse for reassembly and
replacement.
Caution:
The seat rotating disk is the connection between
the frame and the seat board. If it is damaged,
please replace with a new one directly.
Service Manual
26