Show Vlan Access-Map - Cisco Catalyst 3750 Command Reference Manual

show vlan access-map

show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
Syntax Description mapname
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(11)AX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz"
Match clauses:
Action:
Related Commands Command
show vlan filter
vlan access-map
vlan filter
Catalyst 3750 Switch Command Reference
2-396
show vlan access-map [mapname] [ | {begin | exclude | include} expression]
(Optional) Name of a specific VLAN access map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
10
ip address: SecWiz_Fa1_0_3_in_ip
forward
Description
Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01