Show Pagp - Cisco WLC 5700 Series Command Reference Manual

show pagp

show pagp

To display Port Aggregation Protocol (PAgP) channel-group information, use the show pagp command in
EXEC mode.
show pagp [channel-group-number] {counters| dual-active| internal| neighbor}
Syntax Description
channel-group-number
counters
dual-active
internal
neighbor
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Examples This is an example of output from the show pagp 1 counters command:
Controller> show pagp 1 counters
Port
----------------------------------------
Channel group: 1
Gi1/0/1
Gi1/0/2
This is an example of output from the show pagp dual-active command:
Controller> show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
52
(Optional) Channel group number. The range is 1 to 128.
Displays traffic information.
Displays the dual-active status.
Displays internal information.
Displays neighbor information.
Information Flush
Sent Recv Sent Recv
45 42 0 0
45 41 0 0
Layer 2/3 Commands
Modification
This command was introduced.
OL-32323-01