Amano Time Guardian FRT-40 User Manual page 87

Descriptions of the Communications/Fingerprint, MTX, and Hand Punch
functions follow:
Polling: This operation collects the most recent data from the
terminal. When checked, Time Sync. performs time synchronization
between the Host PC and the terminal including Daylight Saving
settings. See Using the Fingerprint Commands Tab on page 4-6 for
more detail.
Downloading: Sends Daylight Saving Time (DST) settings,
employee assignments and Bell and Door Schedules to the terminal.
See Using the Fingerprint Commands Tab on page 4-6 for more
detail.
Note: When this command is issued, the fingerprint terminal display
will show Download...., followed by Working...., and finish with
Restarting.....The terminal will power off then back on to
refresh the options just downloaded to it. Simultaneously the
lower portion of the Fingerprint Commands screen will display all
sent assigned users, and any time format changes (see the
following figure). Click on Clear Display to clear the displayed
information.
Caution! The Poll and Download commands, when used from the
Communications menu in Time Guardian will perform
these functions to selected terminals, all terminals, and
all locations.
Page 4-10 FPT-40 Fingerprint Terminal Installation & Operation Guide