Communication Menu - Amano Time Guardian FRT-40 User Manual

Caution! This command can be used to clear [reset] the terminal if
an Administrator has been setup and the password is
lost, etc. Access at the terminal to the menu options,
etc. maybe denied unless it is an Administrator.
Note: All the above command options can be performed at either
Selected Terminals, All Terminals, or All Locations. Whereas,
the "Polling" and "Downloading" commands from the
Communication menu can only be performed on
All Terminals at All Locations.

Communication Menu

The Communication menu can be used to remotely perform functions on
active terminals from the Host PC. It is divided into two groups, those
functions distinct to MTX terminals, and those for polling and
downloading to the all terminals connected to Time Guardian. Click on
Communication from the main Time Guardian screen view and the
following dropdown menu will appear:
The MTX submenu selections (see figure) only allows you to perform the
following operations on active MTX Time Guardian terminals:
The Poll/Download submenu selection allows you to perform the
following operations on all active Time Guardian terminals, including
FPT-40 Fingerprint, MTX, and Hand Punch terminals. Click on
Poll/Download submenu from the Communication menu and the
following pop up menu will appear:
FPT-40 Fingerprint Terminal Installation & Operation Guide Page 4-9