Deleting Users - Amano Time Guardian FRT-40 User Manual

4. Select Enroll FP, Enroll Pwd, or FP & Pwd using the
press OK. The screen to select the privilege level [Admin,
Supervisor, or Enroller] will appear (see Figure 2-80).
Figure 2-80 Admin Accredit Selection Screen
5. After selecting the authorization level, press OK, and the enrollment
process will be the same as the regular FP, Pwd, or FP & Pwd
enrollment. If you continue to enroll users with privileges without
exiting to the Enroll Admin menu, the privilege level will remain the
same. When finished enrolling a user with privileges, or desiring to
switch privilege levels, press ESC to return back to Enroll Admin
menu.

Deleting Users

Note: If you try to delete a User at the terminal without having the
required privilege, a message "Access Deny!" will briefly appear,
and the display will return to the previous screen.
To delete a user at the FPT-40 terminal perform the following:
1. Press the Menu button to display the main menu, or display "Admin
Affirm 1" on the top of the Welcome screen (see figure) and login as
a user with privileges.
2. To login from the Welcome screen either place your finger on the
or
sensor enter your assigned User ID using the keypad.
FPT-40 Fingerprint Terminal Installation & Operation Guide
Admin Accredit
Admin
ESC
Admin Affirm
08 : 20
Figure 2-81 Menu Screen
OK
1
AM
FRI
button, and
Page 2-33