Advanced Options (Adv Option) Menu - Amano Time Guardian FRT-40 User Manual

5. Select DST End, and press OK to enter the end date/time for DST
(see figure for example). Use the
choices and the keypad to enter values. Press OK to save or ESC to
exit with default settings.
Note: The FPT-40 Fingerprint terminal will utilize these settings to
adjust the terminal's future clock time based upon the DLS date
settings. However, the Time Guardian DST settings (see figure)
will have precedent.
Figure 2-101 Time Guardian DLS Settings

Advanced Options (Adv Option) Menu

Use the Adv Option menu at the FPT-40 terminal to:
Reset Opts.: selecting this command will restore all setup
information in the terminal to the factory default settings.
Del AttLogs: selecting this command will delete all user logs from
the flash memory.
FPT-40 Fingerprint Terminal Installation & Operation Guide
MM - DD
10 - 02
ESC
Figure 2-100 DST End Date/Time
or buttons to move between
24H
2:00
OK
Page 2-41