How To Change A User Password With Backup Enroll - Amano Time Guardian FRT-40 User Manual

11. Input the password using the keypad [press OK if less than 5 digits],
and repeat the password entry to affirm. Press ESC to abort
password entry and return to the Enroll User menu.
Figure 2-32 Input Password with Next User ID
12. Go back to Step 8 to continue the process for the next user. Press
ESC to end enrollment and return to the Enroll User menu.

How to Change a User Password with Backup Enroll

The following procedure details how to change an existing user
password. The FP & Pwd Enroll procedure could also be used to change
the password, but you will have to enroll another finger to get password
access. Therefore, the following is recommended as the easiest method
for changing a password.
To change a user's password at the FPT-40 terminal perform:
1. Press the Menu button to display the main menu (see figure), or
display "Admin Affirm 1" and login with privileges.
2. Press OK to display the User Manage menu (see figure).
FPT-40 Fingerprint Terminal Installation & Operation Guide
New Enroll
Continue ?
Input Pwd _
ESC
Menu
User Manage
Options
Sys Info
Figure 2-33 Menu Screen
User Manage
Enroll User
Enroll Admin
Delete
Figure 2-34 User Manage Menu
OK
Page 2-17