Key Test; Rtc Test; Frequently Asked Questions (Faqs) - Amano Time Guardian FRT-40 User Manual

Key Test

Once the Key Test has started, pressing any numeric key will display the
number on the highlighted test line (see figure). MENU will indicate
"MENU" and or
ESC to return to the Auto Test menu.

RTC Test

This will test the Real Time Clock in the FPT-40 Fingerprint terminal and
indicate the functional status. Press OK to perform test. The test will
display OK! if the RTC status is operational (see figure). Press OK or
press ESC to return to the Auto Test menu.

Frequently Asked Questions (FAQs)

1. Q: Some user's fingerprints occasionally cannot be verified?
A: The following reasons could lead to a poor fingerprint template:
Smooth fingerprint
The fingerprint contains too many drapes [ridges] and/or
they change too often
The fingerprint in question has serious skin shed
Resolution: Select a different fingerprint (less crinkle, no
sloughed off skin, clear image), and make your fingerprint touch
a larger area of the sensor. Also, enroll more than 1 fingerprint,
and use 1:1 match method with password verification method.
FPT-40 Fingerprint Terminal Installation & Operation Guide
will display "UP" or "DOWN". Press OK or press
Key Test
Press Any Key
NUM: 7
ESC
Figure 3-10 Key Test Example
RTC Test
OK!
ESC
Figure 3-11 RTC Test Ok
OK
OK
Page 3-5