How To Set Daylight Saving (Dls) Time - Amano Time Guardian FRT-40 User Manual

How to Set Daylight Saving (DLS) Time

Use this function to set the Daylight Saving (DLS) Time start/end dates
and times at the FPT-40 terminal with the following procedure:
1. From the System Opt menu select DLS Settings (see figure).
2. Press OK to display the DLS Settings menu (see Figure 2-98) and
select DLS Settings.
3. Press OK to highlight the setting and select Y or N. Press OK to
save the selection.
4. Select DST Start, and press OK to enter the begin date/time for DST
(see figure for example). Use the
choices and the keypad to enter values. Press OK to save or ESC to
exit with default settings.
Note: The DST Start and End time format is fixed as a 24H format.
Page 2-40 FPT-40 Fingerprint Terminal Installation & Operation Guide
System Opt
Language
Fmt MM-DD-YY
DLS Settings
Figure 2-97 Selecting DLS
DLS Settings
DLS Settings
DST Start
DST End
Figure 2-98 DLS Settings
MM - DD
3 - 09
ESC
Figure 2-99 DST Start Date/Time
ENG
Y
or buttons to move between
24H
2:00
OK