6. Press OK to continue with New Enrollment for finger template and
display the New Enroll Place Finger... (see figure). Follow the on
screen prompts for a total of 3 finger presses to complete the
process. Wait for the screen to prompt you each time to place your
finger!
Note: Pressing ESC at this step will bypass finger enrollment and
move to New Enroll for password input.
Figure 2-49 Create Fingerprint Template
7. Next, input the password (see figure) using the keypad. If less than 5
digits, press OK to enter. Press ESC to exit password entry and save
just the fingerprint.
Figure 2-50 New Enroll Input Pasword
8. Repeat the password entry to affirm, and display the User ID with a
"-0P" (see Figure 2-52) to indicate that this User has 1 finger
template ("0") and a password ("P")
Page 2-22
FPT-40 Fingerprint Terminal Installation & Operation Guide
New Enroll
00014-0
Place Finger . . .
ESC/Exit
New Enroll
00014-0
Input Pwd -
ESC
New Enroll
00014-0P
Input Pwd xxxxx
Pwd Affirm _
Figure 2-51 Affirm New Password
OK
Need help?
Do you have a question about the Time Guardian FRT-40 and is the answer not in the manual?
Questions and answers