6. Press OK to proceed and display "New Enroll Place Finger..."
(see figure). Follow the on screen prompts for a total of 3 finger
presses to complete the process, or press ESC to exit to the Enroll
User menu.
Note: The system may prompt you with voice and on screen warnings
if errors in the FP enrollment process occur. For example, if that
ID already has the same finger enrolled, the voice prompt will
say "Duplicate Finger" while the screen will display "FP Enrolled
Alrd" [for fingerprint enrolled already].
Note: The system will not allow duplicate enrollment of the same finger
for the same or different User IDs. You must enroll a different
finger.
rd
7. After the 3
successful finger press, the display will show the User ID
followed by " – 0" (see figure) to indicate that one (1) finger template
exists for this ID.
Figure 2-19 Save User ID with FP Template
Page 2-12
FPT-40 Fingerprint Terminal Installation & Operation Guide
New Enroll
04535-0
Place Finger
ESC/Exit
Figure 2-18 Place Finger 1st Pass
New Enroll
00002-0
ESC
+ + +
OK(Save)
Need help?
Do you have a question about the Time Guardian FRT-40 and is the answer not in the manual?
Questions and answers