Defining Privileges With Enrolling Admin Option - Amano Time Guardian FRT-40 User Manual

Defining Privileges with Enrolling Admin Option

After power on and setting up the FPT-40 Fingerprint terminal, you may
begin enrolling users. If this is the first enrollment in a new or empty
system, everyone will be able to enroll. However, if there are any user
privileges setup in the terminal, you will need, at a minimum, "Enroller"
level privileges to enroll a new user. The FPT-40 Fingerprint terminal
contains a privileges option to prevent unauthorized personel from
changing terminal parameters. This security option provides three (3)
different levels of authorized use, which are: an enroller, a supervisor,
and an administrator with the following privileges:
Enroller Privilege Level
The Enroller can only access the User Manage and Sys Info menus.
The Enroller can not delete any user's at the terminal.
The Enroller has full access to the enrollment functions for a new
user, and also changing an existing user via Backup Enroll.
The Enroller has access to the "Enroll Admin" function, but can only
create a user with "Enroller" level privileges.
Supervisor Privilege Level
A Supervisor can access all 3 main menus; the User Manage,
Options, and Sys Info menus. However, a Supervisor can not access
the Auto Test menu [from Options menu], the Comm Key [from
Comm Opt menu, and most importantly, the Adv Opt menu [from
System Options].
A Supervisor can only delete a user with no privileges or Enroller
privileges at the terminal.
A Supervisor has full access to the enrollment functions for a new
user, and also changing an existing user via Backup Enroll.
A Supevisor has access to the "Enroll Admin" function, but can only
create a user with "Supervisor" and "Enroller" level privileges.
Admin Privilege Level
The Administrator has full access to all menus, user deletion [can
not delete an Admin], enrollment, and deleting privileges and/or
data from the Adv Opt menu.
Note: The only way to delete a user with Admin privileges at the
terminal is to use the "Clear Admin Pri" [clear administrator
priorities] command from the Adv Option menu.
FPT-40 Fingerprint Terminal Installation & Operation Guide Page 2-31