Scanning Preparation - Icom IC-440N Instruction Manual

■

Scanning preparation

IC-440N scans all tagged channels when a scan is activat-
ed. When the IC-440N fi nds a busy channel, it can be set to
pause or resume after a pause (Scan Stop Timer). (Excluding
repeater search scan).
(See Scan Stop Timer in Set mode. The default setting is
P5).
D
Scan type selection
➥ Push
(Scan Mode) several times to select the desired
O G P
RS
scan type.
• Open, Group and Priority scans are available.
• " ", " " or " " is displayed for 0.5 seconds when each scan
type is selected.
Appears
Open scan is selected.
Appears
O G P
Push
RS
Group scan is selected.
Appears
Priority scan is selected.
O G P
Push
RS
O G P
Push
RS
D
Tag channel setting
q
Select the desired scan type. (See to the left.)
w
Select the desired channel. (p. 14)
e
SCAN
Hold down (Scan Tag) for 2 seconds to toggle the Tag
TAG
channel setting ON and OFF.
• " " appears when the tag setting is ON (The channel is set as
a scan channel).
Appears
To speed up scanning:
For Open scan, cancel the Tag channel setting to skip undesired
channels such as usually busy channels.
For Group scan, set only often-used channels as tag channels.
All memory channels may be set as tag channels by default.
6
SCAN
6
29