Scan; Scanning Preparation; D Scan Type Selection; Tag Channel Setting - Icom IC-41W Instruction Manual

The IC-41W has four scan types, a tag function and four re-
sume conditions. Scanning allows the transceiver to automat-
ically scroll through all or selected channels in order to find a
transmission.

Scanning Preparation

■
The IC-41W scans all tagged channels and can be set for a
pause or timer resume condition. These items must therefore be
defined before starting a scan (except for the repeater search
scan), and must be set for each scan type independently.
D Scan type selection
Push (scan mode) several times to select the desired
scan type.
• Open, group and priority scans are available (see below).
Open scan is selected.
Push
Group scan is selected.
Priority scan is selected.
Appears
Push
Appears
Appears
Push
D

Tag Channel Setting

Setting channels as 'tag' channels allows them to be included
in the scan function.
To set a tag channel:
Select the desired scan type. (to the left)
q
Select the desired channel. (
w
[CH Down] keys)
Push and hold for 2 seconds to toggle the tag function
e
ON or OFF. ( appears when the tag setting is on)
"S"
Appears
6

SCAN

use the [CH Up] and
5
6
17