Configuration For Authentication; Installation Overview; Enabling Authentication - Dell C5765dn User Manual

21 Authentication and Accounting Features

Configuration for Authentication

This section describes the settings to use the Authentication feature on the machine.
The following shows the reference section for each procedure.

Installation Overview ...............................................................................................................500

Enabling Authentication .........................................................................................................500

Changing the Default Authorization Group Settings............................................................503
Creating an Authorization Group ...........................................................................................503
Installation Overview
To use the Authentication feature, configure the following settings.
Note
Login to Local Accounts
Specify the Login Type and access control, and then create a user.
Login to Remote Accounts
Specify the Login Type, access control, and remote authentication server.
Change the default authorization group settings and add an authorization group, as
necessary.
Enabling Authentication
This section describes the procedures for [Login to Local Accounts] and [Login to Remote
Accounts] respectively.
When [Login to Local Accounts] is Selected
Perform the following procedures to use local authentication.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
3
Select [Tools] on the [Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Login Type].
7
Select [Login to Local Accounts], and then select [Save].
For more information, refer to "Login Type" (P.408).
500
• If job flow sheets, which are no longer available for use because of a change in the Login Type, are
linked to folders, they cannot be edited or copied, but still can be used. If you cancel the links,
however, the job flow sheets will no longer be displayed and will be unavailable.
• The default user ID is "admin".
• The default passcode is "1111".