Dell C5765dn User Manual page 335

Authentication System Setup
Authentication System
Allows you to select the authentication system from [Kerberos (Windows 2000)], [Kerberos
(Solaris)], [LDAP], [SMB], and [Authentication Agent].
After you change the authentication system, personal folders and personal sheets used with
the previous authentication system are not deleted automatically. If these folders or job flow
sheets are no longer needed, delete them from the machine. If the same user IDs are also
used on the new authentication system, personal folders and personal job flow sheets can be
used by the same users.
Server Response Time-Out
Set the server time-out response between 1 and 75 seconds in 1 second increments.
Search Time-Out
Set the user information search time-out between 1 and 120 seconds in 1 second increments.
Kerberos Server Settings
Configure the Kerberos Servers 1 to 5.
The settings in [Kerberos Server 1 (Default)] will be the default settings for authentication.
Primary Server Name/Address
Enter the primary server name or IP address.
Note
Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 88.
Note
Secondary Server Name/Address
Enter the secondary server name or IP address.
Note
Secondary Server - Port Number
Set the secondary server port number in the range from 1 to 65535.
The default value is 88.
Note
Domain Name
When you use Active Directory of Windows Server
Windows Server
Name]. Up to 64 characters are allowed.
Note
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
• For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
• Do not use the numbers assigned to the other ports.
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
• For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
• Do not use the numbers assigned to the other ports.
®
2012 as server, specify the domain name of Active Directory in [Domain
• Enter a realm name in uppercase characters. Otherwise, an authentication error occurs.
Connectivity & Network Setup
®
2003, Windows Server
®
2008, or
335