Dell C5765dn User Manual page 514

22 Problem Solving
Symptom
Paper is often
jammed or
wrinkled.
A document is not
fed into the
document feeder.
An error message
appears after
paper is loaded in
Tray 5 and the
<Start> button is
pressed.
514
Cause
Is the paper loaded correctly
in the tray?
Is the paper tray inserted
correctly?
Is the paper damp?
Is the paper curled?
Are the paper and paper tray
settings correct?
Are any torn pieces of paper
remaining or is there a foreign
object in the machine?
Is non-standard paper loaded
in the tray?
Is paper exceeding the
maximum fill line in the tray?
Are the paper guides set
correctly?
Is the image nearly the same
size as the paper?
Is the paper finely cut out?
Is the document small?
Check the positions of the
paper guides of Tray 5.
Remedy
Load the paper correctly.
Refer to "Loading Paper" (P.207).
Firmly push in the paper tray until it stops to
insert it correctly.
Refer to "Loading Paper" (P.207).
Replace the paper with new one.
Refer to "Loading Paper" (P.207).
Turn over the paper in the tray, or replace the
paper with new one.
Refer to "Loading Paper" (P.207).
Correctly set the paper and paper trays to
correspond to the paper.
Refer to "Changing the Paper Settings"
(P.214).
Open the cover of the machine or slide out
the paper tray to remove the torn pieces or
the foreign object.
Refer to "Paper Jams" (P.617) or "Loading
Paper" (P.207).
Replace with paper that meets machine
specifications.
Refer to "Print Media Guidelines" (P.200) or
"Loading Paper" (P.207).
Load paper in the paper tray so that it does
not exceed the maximum fill line.
Refer to "Loading Paper" (P.207).
Load the paper correctly, and align the paper
guides to the paper.
Refer to "Loading Paper" (P.207).
Increase the edge erase widths.
For more information, refer to "Copy" (P.49)
when you copying, or to the help of the print
driver when printing.
Some types of paper may not be cut out
finely. Load the paper after fanning it well.
The minimum size of the document that can
be loaded on the document feeder is 125 x 85
mm (Standard size: A5).
Refer to "Copying Procedure" (P.50).
Adjust the paper guides to the correct
positions.
Refer to "Loading Paper in Tray 5 (Bypass
Tray)" (P.211).