Edge Erase (Erasing Edges And Margin Shadows Of The Document) - Dell C5765dn User Manual

3 Copy
2
Select [On].
Off
Select this option when copying documents of the same size.
On
When documents of different sizes are copied, the machine automatically detects the size
of each document.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
• Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
• Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.

Edge Erase (Erasing Edges and Margin Shadows of the Document)

When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. The Edge Erase
feature allows you to erase such shadows.
Note
90
• The [Original Orientation] setting is based on the orientation of the first page of a document. Load the
second and subsequent pages of the document based on this setting.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may not
detect the top of the document correctly.
• For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce / Enlarge], the edge erase amounts will be reduced or enlarged in proportion to the
ratio you specified.
• The binding shift specified in [Booklet Creation] will not affect the edge erase amounts.
• If the original document is placed on the document glass and [1 2 Sided] is selected when using 2
Sided Copying feature, symmetrical edge erase amounts on both sides are not applied to output even
if [Individual Edges] is specified and [Mirror Side 1] is selected as [2 Sided Original-Side 2] option. To
apply symmetrical edge erase amounts on both sides, select [2 2 Sided] for 2 Sided Copying
operation.
• Even when the edge erase amount is set to 0 mm, full page copying cannot be made.