Dell C5765dn User Manual page 588

22 Problem Solving
Status Code
026-711
[Cause]
[Remedy] Take one of the following measures:
Note
026-712
[Cause]
[Remedy] Retry after waiting for a while.
026-718
[Cause]
[Remedy] Confirm the print data, and try printing again.
026-719
[Cause]
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
026-720
[Cause]
[Remedy] Confirm the amount of available space.
026-721
[Cause]
[Remedy] Check the following conditions:
026-722
[Cause]
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
Note
026-726
[Cause]
[Remedy] Modify the machine configuration information in the print driver screen to match the
026-727
[Cause]
[Remedy] Take one of the following measures:
026-730
[Cause]
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
588
Exceeded the maximum size allowed for a multi-page file when scanning.
1)Reduce the resolution (scan quality) of the scan parameters and execute the operation
again.
2)Reduce the number of document pages and then execute the operation again.
The maximum size is 2 GB for TIFF, XPS, and PDF.
• XPS stands for XML Paper Specification.
An error occurred while operating from Dell Printer Configuration Web Tool.
Incompatible print parameters are used. The combination of the specified features such
as Document Size, Paper Size, Paper Tray, 2 sided printing, and Output Tray is
incompatible.
An error occurred while operating the Store to USB service.
Customer Support at dell.com/contactdell.
The capacity of the USB memory device of the recipient is insufficient while performing
the Store to USB service.
An error occurred while operating the Store to USB service.
• The USB memory device is inserted into the USB memory slot.
• The USB memory device is accessible from your computer.
• The unencrypted USB memory device is used.
The USB memory device is not initialized.
execute the operation again.
• Supported file formats: FAT12, FAT16 (FAT), FAT32
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact Customer Support at dell.com/contactdell.
The machine configuration information at a print job specification does not match the
actual machine configuration.
actual machine configuration.
Probable causes are asCustomer Support at dell.com/contactdell follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
The size of paper loaded in the specified tray is unknown.
Cause and Remedy