Dell C5765dn User Manual page 606
Color laser multifunction printer
Hide thumbs
Also See for C5765dn:
- Installation and configuration manual (53 pages) ,
- Template manual (14 pages) ,
- Manual (1 page)
Table of Contents
Advertisement
22 Problem Solving
Status Code
091-316
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
092-316
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
092-318
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
092-319
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
092-320
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
092-321
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
093-320
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
094-310
[Cause]
094-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
094-316
094-320
094-321
102-356
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-210
[Cause]
116-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-212
606
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
Temperature sensor of the machine detected abnormality.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
Density of Yellow color is low. Drum cartridge or toner cartridge may not be set properly.
on the machine power. If the same message is displayed again, pull out the drum
cartridge [K] and the toner cartridge [Y] (yellow), and then insert them again. If the
error still is not resolved, contact Customer Support at dell.com/contactdell.
Density of Magenta color is low. Drum cartridge or toner cartridge may not be set
properly.
on the machine power. If the same message is displayed again, pull out the drum
cartridge [K] and the toner cartridge [M] (magenta), and then insert them again. If the
error still is not resolved, contact Customer Support at dell.com/contactdell.
Density of Cyan color is low. Drum cartridge or toner cartridge may not be set properly.
on the machine power. If the same message is displayed again, pull out the drum
cartridge [K] and the toner cartridge [C] (cyan), and then insert them again. If the error
still is not resolved, contact Customer Support at dell.com/contactdell.
Density of Black color is low. Drum cartridge or toner cartridge may not be set properly.
on the machine power. If the same message is displayed again, pull out the drum
cartridge [K] and the toner cartridge [K] (black), and then insert them again. If the error
still is not resolved, contact Customer Support at dell.com/contactdell.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred in the USB memory device.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
Cause and Remedy
Advertisement
Table of Contents
Troubleshooting
