Dell C5765dn User Manual page 587

Status Code
024-747
[Cause]
[Remedy] Confirm the print data, and try printing again.
024-748
[Cause]
[Remedy] Set [Bates Stamp - Number of Digits] to the value specified in [Starting Number] or to
024-775
[Cause]
[Remedy] Change the printer properties setting to split the pages appropriately to create separate
025-596
[Cause]
025-597
[Remedy] Replace the hard disk.
026-700
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
026-701
[Cause]
[Remedy] Wait for a while and execute the operation again. If the only one query is being
026-702
[Cause]
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
026-703
[Cause]
[Remedy] Authenticate when adding documents.
026-708
[Cause]
[Remedy] Take one of the following measures:
026-709
[Cause]
[Remedy] Wait around one day, and when capacity becomes available as a result of the automatic
026-710
[Cause]
[Remedy] Take one of the following measures:
Incompatible print parameters are used. The combination of the specified features such
as Document Size, Paper Size, Paper Tray, 2 sided printing, and Output Tray is
incompatible.
The number of digits specified in [Bates Stamp - Number of Digits] screen does not
match the value specified in [Starting Number].
[Auto Assign].
Booklet printing was specified for printer properties, but the number of print pages for
the job exceeded the maximum number allowed for booklet creation.
volumes, or to cancel the booklet creation setting.
An error occurred with the hard disk.
By Address Book operation, the machine received an unsupported protocol from the
LDAP server.
at dell.com/contactdell.
The number of queries submitted to the Address Book exceeded the machine's
processing capability.
submitted to the Address Book, the machine's software may be defective. Contact
customer support.
The number of accesses from the LDAP server to the machine by Address Book
operation exceeded the machine's processing capability.
Customer Support at dell.com/contactdell.
Authentication is canceled when adding documents during faxing or scanning.
Exceeded the maximum limit for the scan data size that can be stored for one job with
Store & Send Link.
1)Reduce the resolution (scan quality) of the scan parameters and execute the operation
again.
2)Reduce the image with magnification of the scan parameters (such as A3 > A4) and
then execute the operation again.
3)If [Store & Send Link - Maximum File Size] is set to a small value, increase the value.
The capacity of the hard disk that can be used to store scan data with Store & Send Link
is insufficient.
deletion of files, execute the operation again.
The machine has received an e-mail encrypted by S/MIME, but does not support the
encryption method.
• Ask the sender to send the e-mail encrypted by 3DES.
• Disable the FIPS140 validation mode of the machine.
Cause and Remedy
Status Code
587