Dell C5765dn User Manual page 610

Color laser multifunction printer
Hide thumbs Also See for C5765dn:
Table of Contents

Advertisement

22 Problem Solving
Status Code
116-741
[Cause]
[Remedy] Delete unnecessary form. The maximum number allowed is 2048.
116-742
[Cause]
[Remedy] Delete unnecessary logo data.
116-743
[Cause]
[Remedy] Increase memory.
116-746
[Cause]
[Remedy] Use the form registered, or register the form.
116-747
[Cause]
[Remedy] Decrease the paper margin value, and then execute the operation again.
116-748
[Cause]
[Remedy] Check the print data.
116-749
[Cause]
[Remedy] Install the font, or set the print driver to replace the font.
116-750
[Cause]
[Remedy] Restore the tray to normal condition or change the Banner sheet tray.
116-751
[Cause]
[Remedy] Delete stored data in the hard disk. If the error still is not resolved, split the file and send
116-752
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
Note
116-771
[Cause]
116-772
[Remedy] The printed image may be incomplete. Confirm with the sender whether the image has
116-773
116-774
116-775
116-776
116-777
116-778
116-780
[Cause]
[Remedy] Check the attached document.
117-312
[Cause]
[Remedy] Contact Customer Support at dell.com/contactdell.
117-319
[Cause]
117-320
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
117-321
117-323
117-324
610
The form cannot be registered because the number of the form registration exceeds the
maximum number allowed.
The logo data cannot be registered because the number of the logo data registration
exceeds the maximum number allowed.
The logo data or form cannot be registered because the memory for the form and logo
data are insufficient.
The form specified is not registered.
The paper margin value is too large for the HP-GL/2 active coordinates area.
There is no plot data in the HP-GL/2 print data.
The job was cancelled because the specified font does not exist.
Banner sheet tray malfunction
The process has been canceled because the hard disk is full.
the job again.
The descriptions of the PDF or XPS printing job ticket have a problem.
at dell.com/contactdell.
• XPS stands for XML Paper Specification.
The data was automatically modified because it included an invalid parameter.
a problem, or ask the sender to send the data again.
There is a problem with the document attached to the received e-mail.
An error occurred in the machine.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
Cause and Remedy

Advertisement

Table of Contents
loading

Table of Contents