Calling A Stored Program - Dell C5765dn User Manual

Color laser multifunction printer
Hide thumbs Also See for C5765dn:
Table of Contents

Advertisement

Calling a Stored Program

The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered the
stored program appears.
1
Press the <Home> button.
2
Select [Stored Programming].
3
Select a number of a stored program containing
the features you want to use.
Note
For information on how to change the volume of the sound that notifies that a stored program has
been called, refer to "Stored Programming Complete Tone" (P.299).
4
After the stored program is called, select other features if necessary.
5
Press the <Start> button.
• You can only select registered numbers.
• Select [
] to return to the previous screen or
[
] to move to the next screen.
• After the stored program has been called, the
machine sounds an audible tone. If a failure
occurs, the machine sounds a fault tone.
Calling a Stored Program
<Home> button
<Start> button
159

Advertisement

Table of Contents
loading

Table of Contents