Dell C5765dn User Manual page 601

Status Code
033-545
[Cause]
[Remedy] Check whether the other machine is a facsimile.
033-546
[Cause]
[Remedy] Check whether the line is connected correctly.
033-547
[Cause]
[Remedy] No measure is required.
033-548
[Cause]
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549
[Cause]
[Remedy] Wait for a while, and execute the operation again.
033-550
[Cause]
[Remedy] Wait until the job being communicated completes, and then execute the operation
033-551
[Cause]
[Remedy] Wait for a while, and execute the operation again.
033-552
[Cause]
[Remedy] Confirm the model of the other machine, and execute the operation again. If receiving,
033-553
[Cause]
[Remedy] If necessary, check whether the sender entered an invalid F-code.
033-554
[Cause]
[Remedy] No measure is required.
033-555
[Cause]
[Remedy] Check whether the sender specified an incorrect machine password.
033-556
[Cause]
[Remedy] If necessary, check whether the correct machine password has been instructed to the
033-557
[Cause]
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
033-558
[Cause]
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
033-563
[Cause]
[Remedy] Take one of the following measures:
The other machine may not be a facsimile.
A dial tone was not detected.
Communication was terminated by a cause such as pressing the <Stop> button.
Cannot transmit manually because a line is unavailable.
Cannot use the Fax service because of causes such as memory is insufficient.
Cannot execute another job because fax communication is in progress.
again.
You attempted to change a job immediately before fax or telephone communication
completed.
The total quantity of error lines detected with G3 exceeded the set value.
ask the sender to send again.
This machine does not have confidential or relay function. The F-code sent from the
other machine contains an instruction for a function not supported by the machine.
The password was omitted or did not match in fax communication.
The password received from the other machine did not match the password for receiving
faxes on the machine.
The password sent to the other machine did not match the password for receiving faxes
on the other machine.
other machine.
The number of services or of recipients exceeds the maximum limit.
recipients, and then send again.
The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
remote ID is not sent.
Paper that can print faxed documents is not loaded in a tray.
• Specify the paper size.
• Confirm whether the paper tray is set correctly.
Cause and Remedy
Status Code
601