Dell C5765dn User Manual page 566

Color laser multifunction printer
Hide thumbs Also See for C5765dn:
Table of Contents

Advertisement

22 Problem Solving
Status Code
016-722
[Cause]
[Remedy] Confirm the staple position and the paper size, and try printing again.
016-725
[Cause]
[Remedy] Do not use the Job Flow feature. Simply scan the document from the machine's [Fax]
016-727
[Cause]
[Remedy] The file could not be stored into the folder because the machine determined the print
016-728
[Cause]
[Remedy] Confirm the print data.
016-729
[Cause]
[Remedy] Change the number of colors or resolution for the TIFF file, and execute the operation
016-731
[Cause]
[Remedy] Retry printing.
016-732
[Cause]
[Remedy] Resend the form data.
016-733
[Cause]
[Remedy] For 1), confirm the e-mail address.
016-738
[Cause]
[Remedy] Specify a paper size supported for booklet creation, and try printing again.
016-739
[Cause]
[Remedy] Specify a combination of document size and paper size supported for booklet creation,
016-740
[Cause]
[Remedy] Specify a paper tray supported for booklet creation, and try printing again.
016-741
[Cause]
016-742
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-743
016-744
016-745
016-746
[Cause]
[Remedy] Print using a print driver.
566
The specified staple position is not supported by the machine, or the paper size specified
is not supported by the finisher.
A scanned document stored in a folder was to be sent by fax using the Job Flow feature,
but the file in the folder could not be converted to fax data.
screen to send it by fax.
A print job was cancelled without storing a file into a folder because the file was
determined as not containing any pages.
file as not containing any pages. Disable [Skip Blank Pages] on the [Advanced] tab on
the print driver, or add text to the file if the file is blank.
An unsupported tag is included in the TIFF file.
Unable to print because the number of colors or the resolution of the TIFF file exceeds
the allowed range.
again.
Unable to print TIFF data because it was interrupted.
The form specified by emulation has not been registered at the host side.
Probable causes are as follows:
1)Unable to obtain the IP address (the string after "@" in the destination e-mail address)
when e-mail is sent.
2)DNS server was unable to resolve the Internet address (the string after "@") by the
DNS server when e-mail is sent.
For 2), confirm the DNS server address.
Unsupported paper size was specified when specifying booklet creation with PostScript.
Used an unsupported combination of document size and paper size when specifying
booklet creation with PostScript.
and try printing again.
Used an unsupported paper tray when specifying booklet creation with PostScript.
An error occurred during the update process of the machine.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
An unsupported feature is included in the received PDF.
Cause and Remedy

Advertisement

Table of Contents
loading

Table of Contents