Dell C5765dn User Manual page 590

22 Problem Solving
Status Code
027-513
[Cause]
[Remedy] Consult your system administrator for settings.
027-514
[Cause]
[Remedy] Check the following conditions:
027-515
[Cause]
[Remedy] Take the following measures:
027-516
[Cause]
[Remedy] Take one of the following measures:
027-518
[Cause]
[Remedy] Confirm the password for the shared folder.
590
The machine failed to transfer data using SMB of the Scan to PC service because access
to the SMB server was not permitted.
When the server is Macintosh, a folder with the same name as the specified file name
may exist on the server.
The machine failed to transfer data using SMB of the Scan to PC service because an error
has been occurred between the SMB server and the DNS server.
• The SMB server is connected to the DNS server.
• The SMB server name is registered on the DNS server.
The machine failed to transfer data using SMB of the Scan to PC service because an error
has been occurred.
• Set the DNS server address.
• Set the target SMB server address using IP address.
Probable causes are as follows:
1)The SMB server of the destination computer cannot be found while transferring data
using SMB of the Scan to PC service (TCP/IP session establishment failed).
2)The SMB server specified as the destination does not respond to the machine while
transferring data using SMB of the Scan to PC service.
3)Failed to name resolution of the SMB server specified as destination to transfer data
using SMB of the Scan to PC service.
1)Confirm the connection of the network cable.
- For communications over subnet, confirm the WINS server settings, and check
whether the server address can be resolved correctly.
- File Sharing service (communicating via port 137 (UDP), port 138 (UDP), and
port 139 (TCP)) is authorized for the Firewall settings of the destination SMB
server.
2)Check whether the file sharing service is enabled on the destination SMB server.
- File Sharing service for Microsoft Network is activated.
If the error still is not resolved, check the following setting.
- NetBIOS over TCP/IP for TCP/IP is activated.
3)Take one of the following measures:
- When the destination SMB server name is specified using the FQDN (example:
mypc01.abc0.co.jp), confirm that the DNS server address is set correctly in the
Connectivity & Network Setup of the machine.
- If the connection with the DNS server has any problem, check whether the
destination server name set in the machine is registered on the DNS server.
The machine failed to transfer data using SMB of the Scan to PC service because the
specified password was incorrect.
When the server is Macintosh, the specified user may not have been registered as a user
who is permitted to use Windows Sharing.
When the server is Macintosh, specify a user who is permitted to use Windows Sharing.
Cause and Remedy