Dell C5765dn User Manual page 303

Color laser multifunction printer
Hide thumbs Also See for C5765dn:
Table of Contents

Advertisement

You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray
5] screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
A/B Series Size
You can select a paper size from A and B series sizes.
Inch Size
You can select a paper size from inch series sizes.
Others
You can select a paper size from other sizes.
Custom Size
You can enter any size. Set the X width between 127 and 356 mm, and the Y length between
76 and 216 mm in 1 mm increments.
Note
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], and [Enable for Same
Paper Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
Note
Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according
to the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Image Quality
You can specify the image quality processing method for each of plain paper, bond paper,
recycled paper, plain reload paper, and custom paper 1 to 5.
When copying or printing a document, the machine controls the image quality according to
the type of paper set in [Paper Tray Attributes] and the image quality processing method
specified for that type of paper.
The following table shows available settings.
• For open flap envelopes, enter the size with the flap size included.
• The machine does not switch the tray automatically in the following cases:
- Tray 5 is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is selected.
Common Service Settings
303

Advertisement

Table of Contents
loading

Table of Contents